Main research areas cover nanofibers, air and water filtration, gas filtration, and composites. It was founded in the Istanbul Technical University laboratories and graduated from the «school» in 2014.
Areka Composite Technologies


Within the scope of Areka-Composites, tubular composite designs and productions in different sizes and cross-sections are made. Considering the usage area of the composite tube/tank, pre-production modeling and analysis by finite element method are made before production. Performance measurements of composite tubes and tanks are made according to the relevant ASTM and EN standards of the final product.

The used reinforcing materials for Areka composite tubes and tanks are;

  • Natural fiber
  • Glass fiber
  • Carbon fiber

The used matrixes for Areka composite tubes and tanks are;

  • Unsaturated polyester resin
  • Vinylester resin
  • Epoxy resin

With helical winding, winding is performed at desired mechanical performance values, angle and wall thickness.
Capacity information is given in the table on the right.

For detailed information, please contact us.

Areka composite tubes and tanks
Cross-Section Outer Diameter (mm) Length (mm)
Triangular 16 - 200 850
Polygonal 30 - 200 850
Rectangular 10 - 200 850
Circular 10 - 200 850
Areka composite tubes and tanks


Areka carbonfiber rollers

Carbon fiber rollers have been used for many years in systems where continuous production is essential. Carbon fiber rollers are more rigid and tough materials compared to aluminum rollers. Since they are 5 times lighter than aluminum, they provide additional features in terms of energy consumption and product quality. For this reason, they positively affect the performance of the production line in which they are used.

Product Code Diameter (mm) Length (mm)
CFR20 20 850
CFR25 25 850
CFR30 30 850
CFR35 35 850
CFR40 40 850
CFR45 45 850
CFR50 50 850
CFR60 60 850
CFR70 70 850
CFR75 75 850
CFR80 80 850
CFR90 90 850
CFR100 100 850
CFR125 125 850
CFR150 150 850
CFR200 200 850

For detailed information, please contact us.